Ultrasonic Photoresist Coater Ultrasonic Photoresist Coater - Spraying Photoresist For MEMS Wafers The ultrasonic spray coating machine UAM6000 combines new spray and control technology to achieve more uniform, denser and controllable thin film coating. The equipment integrates multiple systems, such as ultrasonic, carrier gas, heating plate, vacuum adsorption and exhaust gas discharge. At the same time, it can be applied to a full range of ultrasonic nozzles, suitable for medium [...]

Photoresist Spraying UAM6000 ultrasonic photoresist spraying equipment can spray photoresist thickness from 2um to 35um on substrates with diameters from 65mm to 200m. According to our experience with photoresist spraying, its solvent is generally Acetone, MEK, PGMEA or butyl acetate. Firstly the substrate must be level, non-levelness will cause unevenness in the film. Then for the uniform and controllable coating thickness, it requires higher coating process. Our company has an [...]

Spray Coating Photoresists Spray Coating Photoresists - Ultrasonic Spray Nozzle - Cheersonic Cheersonic focused on the ultrasonic coating technology more than 20 years. We have much experience in spraying photoresist fields. UAM4000L ultrasonic spraying machine is a popular equipment in experimental research and development and small batch production, which can be used in the following cases: Liquid: photoresists Thickness of film: 2um to 35 um Size of substrate: diameter of [...]

Ultrasonic Spray Technology For Sensing Materials Ultrasonic spray coating technology is used for Graphene, Conduction polymer, Metal oxide np and other sensing materials. Ultrasonic spraying systems can meet the following requirements: 1. Base material: alumina base material (size: 4 inch square, 60*70/50.8*50.8) 2. Temperature control system: Temperature control range: room temperature -150°C, temperature uniformity due to ±3°C, temperature control accuracy ±0.5°C, stage can be rotated, maximum speed 200rpm, material: corrosion-resistant [...]

Soldering LEDs Soldering LEDs - Ultrasonic Soldering Iron - CHEERSONIC A light-emitting diode (LED) is a semiconductor light source that emits light when current flows through it. Electrons in the semiconductor recombine with electron holes, releasing energy in the form of photons. The color of the light (corresponding to the energy of the photons) is determined by the energy required for electrons to cross the band gap of the semiconductor. [...]

Welding Sensor Welding Sensor - Ultrasonic Soldering Iron - Cheersonic A sensor is a device that detects and responds to some type of input from the physical environment. The specific input could be light, heat, motion, moisture, pressure, or any one of a great number of other environmental phenomena. The output is generally a signal that is converted to human-readable display at the sensor location or transmitted electronically over a [...]

Ultrasonic Electric Soldering Iron And Soldering Soldering is similar to soldering. Soldering is a welding method that uses low-melting metal solder to heat and melt, and then penetrates and fills the gap between the metal parts. Ultrasonic soldering irons are usually used for soldering. Ultrasonic electric soldering iron is mainly used for soldering of materials and has the advantages of environmental protection, energy saving, and convenience. Soldering irons are commonly [...]

Welding Indium Tin Oxide Coated Glass Welding Indium Tin Oxide Coated Glass - Ultrasonic Welding - Cheersonic ITO COATED GLASS (Indium tin oxide coated glass) belongs to the group of TCO (transparent conducting oxide) conductive glasses. An ITO glass has a property of low sheet resistance and high transmittance. It is mostly used in research and development. ITO coated glass substrates are widely used to organic/inorganic heterojunction solar cells, Schottky [...]

Welding PCBS Welding PCBS - PCBs for Welding Machine - Cheersonic A printed circuit board is an electrical circuit whose components and conductors are contained within a mechanical structure. Conductive features include copper traces, pads, heat sinks, or conductive planes. The mechanical structure is made with insulating material laminated between layers of conductive material. The overall structure is plated and covered with nonconductive solder mask and silk screen to legend [...]

Cheersonic wishes you a Happy New Year! The bell of the new year is about to ring, and the passing of time has left a deep mark. This winter's sunshine and drizzle accompany us as we greet the Spring Festival of 2020. In the past year, we are diligent, sincere, and create proud achievements; in the new year, we are confident, innovative, and the company will create brilliant again! As [...]