Glasses and Ceramics Welding

Glasses and Ceramics Welding – Ultrasonic Soldering Iron – Cheersonic

Ceramic is a high-temperature curing material composed of natural minerals (such as clay, quartz, feldspar, etc.) and other raw materials. Ceramics are usually made by processing and sintering. Ceramics can be shaped, shaped, glazed, and painted as needed during processing. Glass is a transparent and hard material made by melting quartz sand, sodium carbonate, limestone and other raw materials. During the manufacturing process, raw materials are heated to a high temperature to melt and then cooled into solid glass. Ceramic is a crystal structure material composed of a variety of inorganic compound. Its structure is usually directional, so it has certain strength and toughness. The structure of ceramics is usually relatively tight, with a smooth surface but susceptible to wear and tear. Glass is a amorphous solid structural material composed of a variety of inorganic compound. Its structure has no directionality, so it has high transparency and flexibility. The structure of glass is loose and brittle, making it easy to be scratched or broken.

The tip of ultrasonic soldering iron vibrates at ultrasonic frequencies. This vibration induces cavitation in the molten solder, which breaks up and removes oxides and promotes wetting. Ultrasonic soldering iron enables the easier joining of hard-to-solder materials which are known as impossible or difficult to be soldered in conventional soldering. Eco-friendly soldering is achieved by fluxless soldering and no post treatment to remove flux. The ultrasonic soldering technology is widely used in glasses and ceramics. The ultrasonic soldering iron of Cheersonic produces high quality soldered joints. Using the solder alloy, can easily solder directly to glass, ceramics and other low solderability materials.

Cheersonic is an expert manufacturer of ultrasonic equipment. We have focused on ultrasonic soldering technology more than 20 years. The ultrasonic technology and automated system are researched and developed all by ourselves. In our sample and testing studio we are offering the testing of your material. According to the needs and testing result, Cheersonic would customize ultrasonic solutions for you.