Ultrasonic Improve Efficiency in Glass Welding

Ultrasonic Improve Efficiency In Glass Welding – Cheersonic

Glass is an amorphous inorganic non-metallic material, generally made of various inorganic minerals (such as quartz sand, borax, boric acid, barite, barium carbonate, limestone, feldspar, soda ash, etc.) of. Its main components are silicon dioxide and other oxides. The main types are quartz glass, silicate glass, soda-lime glass, fluoride glass, high-temperature glass, high-pressure resistant glass, UV-resistant glass, explosion-proof glass, etc. Usually refers to silicate glass, made of quartz sand, soda ash, feldspar and limestone as raw materials, after mixing, high-temperature melting, homogenization, processing and forming, and then annealing. Widely used in construction, daily use, art, medical treatment, chemistry, electronics, instrumentation, nuclear engineering and other fields. Widely used in buildings, used for wind and light transmission, belongs to the mixture. Hot-melt glass, embossed glass, forged glass, crystal glass, glazed glass, wired glass, polycrystalline glass, glass mosaic, tempered glass, laminated glass, insulating glass, dimming glass, luminous glass. A large part of the handicraft shapes are made of glass. With the industrialization and scale of glass production, glasses with various uses and properties have come out one after another. In modern times, glass has become an important material in daily life, production and science and technology.

The tip of ultrasonic soldering iron vibrates at ultrasonic frequencies. This vibration induces cavitation in the molten solder, which breaks up and removes oxides and promotes wetting. Ultrasonic soldering iron enables the easier joining of hard-to-solder materials which are known as impossible or difficult to be soldered in conventional soldering. Eco-friendly soldering is achieved by fluxless soldering and no post treatment to remove flux. The ultrasonic soldering technology is widely used in PCBS. The ultrasonic soldering iron of Cheersonic produces high quality soldered joints. Using the solder alloy, can easily solder directly to glass, ceramics and other low solderability materials.
1.High-quality joints: Ultrasonic welding generally produces high-quality joints because it creates a fused layer on the surface of the material.
2.Fast welding speed: The welding speed of ultrasonic welding is usually very fast, and the welding can be completed in a short time.
3.Non-destructive welding: Ultrasonic welding is a non-destructive welding method that does not cause damage to the material.
4.Applicable to a variety of materials: Ultrasonic welding can be used on a variety of materials, including metals, plastics, glass, and more.
5.Wide range of welding: Ultrasonic welding can be used for many different workpieces, including flat plates, cylinders, spheres, etc.6.High welding precision: Ultrasonic welding can obtain high-precision welding, which is suitable for the manufacture of products that require high precision.

Cheersonic is an expert manufacturer of ultrasonic equipment. We have focused on ultrasonic soldering technology more than 20 years. The ultrasonic technology and automated system are researched and developed all by ourselves. In our sample and testing studio we are offering the testing of your material. According to the needs and testing result, Cheersonic would customize ultrasonic solutions for you.