Ultrasonic Welding of Stainless Steel Parts

Ultrasonic Welding of Stainless Steel Parts – Soldering Iron – Cheersonic

Stainless steel parts usually include the following parts: bolts: a type of fastener composed of a head and a screw (cylindrical body with external threads), which need to be matched with nuts and used to tighten and connect two parts with through holes. This type of connection is called bolt connection. If the nut is unscrewed from the bolt, it can separate these two parts, so bolt connection is a detachable connection. Stud: A type of fastener without a head and only with external threads on both ends. When connecting, one end of it must be screwed into the part with an internal threaded hole, and the other end must pass through the part with a through hole, and then the nut must be screwed on, even if these two parts are tightly connected as a whole. This type of connection is called a stud connection and is also a detachable connection. Mainly used in situations where one of the connected parts has a large thickness, requires a compact structure, or is not suitable for bolt connection due to frequent disassembly; Screw; Nuts, etc.

The tip of ultrasonic soldering iron vibrates at ultrasonic frequencies. This vibration induces cavitation in the molten solder, which breaks up and removes oxides and promotes wetting. Ultrasonic soldering iron enables the easier joining of hard-to-solder materials which are known as impossible or difficult to be soldered in conventional soldering. Eco-friendly soldering is achieved by fluxless soldering and no post treatment to remove flux. The ultrasonic soldering technology is widely used in stainless steel parts. The ultrasonic soldering iron of Cheersonic produces high quality soldered joints. Using the solder alloy, can easily solder directly to glass, ceramics and other low solderability materials.

Cheersonic is an expert manufacturer of ultrasonic equipment. We have focused on ultrasonic soldering technology more than 20 years. The ultrasonic technology and automated system are researched and developed all by ourselves. In our sample and testing studio we are offering the testing of your material. According to the needs and testing result, Cheersonic would customize ultrasonic solutions for you.